Reviewed by Dean Hawes, Consumer Leasing Specialist, Lightning Rentals. Last reviewed September 2026.
Measuring for furniture and appliance rentals comes down to six checks: measure your available space, confirm the product’s actual width, height, and depth, allow clearance for doors and operation, measure your delivery path, check for installation or orientation requirements, and compare everything against the product’s listed specifications. Getting these right before you rent helps avoid delivery delays and return hassle.
A lounge or appliance may fit within the intended area but still be difficult to deliver or use. Narrow doorways, tight corners, stairs, and limited clearance can all create problems after the product arrives.
Taking accurate measurements gives you a clearer idea of which products suit your home. It also helps you account for the space needed to open doors, access controls, or move comfortably around the item. A few careful checks before selecting a product can save time later.
Measure the width, height, and depth of the area where the product will sit. Record each measurement rather than relying on an estimate. Check for skirting boards, windows, power points, shelves, or nearby furniture that may reduce the usable space.
Review the product specifications and note its complete external dimensions. Product images can make furniture and appliances appear smaller than they are, so use the listed measurements as your guide. Match each product dimension with the corresponding measurement in your room.
The product needs enough room to function after it is in place. Consider doors, drawers, lids, reclining sections, and other moving components. You may also need space around the item for ventilation, cleaning, or comfortable access.
Measure every part of the route from the property entrance to the intended room. This may include the front door, hallways, internal doorways, staircases, landings, and lifts. Pay particular attention to tight turns and fixed objects that could restrict movement.
Some items have installation needs or must face a particular direction. A washing machine may need access to suitable connections, while a chaise lounge may have a left-facing or right-facing configuration. Confirm these details before selecting the product so it suits the planned position.
Place your room, clearance, and delivery measurements beside the product specifications. Do not check the final position alone. The item must fit through the delivery route and leave enough space for normal operation once installed.
A lounge affects seating capacity, walking space, and the placement of other living room furniture. Its configuration also matters, particularly when selecting a modular, corner, chaise, reclining, or sofa-bed design.
Use our full guide to measuring for a lounge for more detailed guidance on room proportions, usable space, and delivery access. You can then compare suitable options in our lounge range or view our living room furniture range.
PayTo, direct debit and how to change your payment method.
A washing machine must fit within the available laundry space while leaving room for its door or lid to open. The position of nearby cabinetry and access to the required connections may also influence which model suits the area.
A dryer also needs enough space for the appliance, its door to open fully, and comfortable loading and unloading. Check the model’s required installation clearances and ventilation or drainage needs, as these vary between vented, condenser, and heat pump dryers.
If you plan to stack a dryer above a washing machine, confirm that both models are compatible and use the manufacturer-approved stacking kit. A washer dryer combo may also be an option where space is limited.
Read our full guide to measuring for a washing machine and dryer (link this once the Laundry Fit Guide is live) before comparing models. You can also browse our washing machines and dryers, or see our full laundry appliance range.
PayTo, direct debit and how to change your payment method.
The space where a product will sit is only one part of the measurement process. The item must also pass through every doorway, hallway, corner, stairway, or lift along the delivery route.
Lightning Rentals supplies furniture and appliances under consumer leases. A consumer lease lets you use the goods for an agreed period while making regular payments, and ownership does not transfer automatically at the end. Once your measurements are done, review the lease term, payment frequency, total amount payable, fees, and end-of-lease conditions. The Consumer Leasing in Australia Complete Guide explains these points in detail.
Product space is the area where the item will sit and operate. Delivery space refers to the route used to bring it into the home. An item can fit comfortably in a room but still be too large to pass through a doorway or around a tight corner.
Yes. Measure all external and internal doorways along the delivery route, including the frame at its narrowest point. You should also check hallways, corners, stairs, lifts, and other restricted areas.
The available options may depend on the product, location, and rental agreement. Contact Lightning Rentals as soon as possible for guidance. Measuring the room and delivery path beforehand reduces the risk of this problem.
Measure the available space and delivery path before comparing products. Once you have shortlisted an item, check its listed dimensions against your measurements. This approach helps you focus on products that have a realistic chance of fitting.
Most people can record basic space and access measurements themselves. Professional assistance may be appropriate if the product requires specialist installation or the access route is difficult. Confirm the product’s installation needs before arranging delivery.